Our heated downdraft spray booth is a comprehensive solution for your painting requirements. It is equipped with a direct-fired air make-up unit that heats fresh air, which is then directed downward through a fully filtered ceiling. This ensures optimal airflow and paint distribution within the booth. The operator can easily set the temperature of this booth. This design is built for a pitted exhaust system (the pit is not included). We provide the booth, the Sure-Cure air makeup unit, the floor grates and filters for your downdraft paint booth.Read more about the spray booth on our website: https://www.gzguangli.com/

As a leading Chinese paint booth manufacturer, our heated downdraft paint booths are built to the highest quality standards using by galvanized steel. We are also able to provide you with a custom paint booth solution to meet your needs and have it delivered quickly.

GZ Guangi EFE Co.,LTD was established in 1994 to service the auto body and collision repair industry. Manufacturing paint booths since 1994, we provide paint booths to automotive body shops, automobile repair and restoration shops and industrial markets.

Guangli Paint Booths: These booths are used by auto body shops. They come in various styles, including front flow, cross flow, and down draft. Different size booths are designed for high production shops, custom restorations, and everything in between. Plus, they’re easy to assemble.

How to determine the ideal size for your paint booth, consider the following factors:

1.Largest Part Dimensions: Measure the width, length, and height of the largest item you’ll be painting. Add at least three feet on each side to allow space for workers to move around.

2.Automated Systems: If you use automated spraying equipment, allocate additional space for machinery operation.

3.Safety and Productivity: Balance safety, productivity, and airflow optimization when choosing dimensions.

Remember, the right paint booth size ensures efficient operations and high-quality finishes!

Spray Car Paint Booths: Explore their ready-to-order, fully equipped car paint booths. We also offer custom-designed spray booths tailored to your specific requirements.

Good choice for considering our automotive paint booths for your business. Our factory is dedicated to producing high-quality paint booths that rival the best in Europe. We consistently deliver superior products designed to meet the stringent demands of the automotive industry.

Making our spray booth a top choice for car dealers and 4S repair shops. Key selling points include:

Superior Quality: Manufactured with precision, our paint booths meet the highest industry standards, offering durability and longevity that match or surpass European and American brands.

Advanced Technology: Equipped with state-of-the-art filtration and airflow systems, our booths ensure a flawless finish every time, reducing rework and increasing productivity.

Energy Efficiency: Designed with energy-saving features, our booths help reduce operational costs while maintaining optimal performance.

Customizable Solutions: We offer a range of custom spray booth to fit the specific needs of your shop, ensuring that you get the perfect setup for your business.

If you’re looking for reliable, top-tier automotive paint booth oven, our products are built to exceed expectations. We invite you to explore our latest blog posts, where we share expert knowledge and updates that reflect our commitment to quality and innovation.

Introducing Stone Forks - the ultimate solution for picking up stones with ease! Crafted with precision and engineered to perfection, Stone Forks is designed to fit Euro, Trima, Blank, or other hooks, making it compatible with a wide range of equipment.



Constructed using high-quality steel, Stone Forks boasts exceptional durability, ensuring it can withstand the toughest of tasks. Whether you’re working on the field or tackling heavy-duty projects, this reliable tool will be your loyal companion.



Featuring a strategically placed hump at the front, Stone Forks prevents stones from sliding off, allowing for efficient gathering and transportation. No more tedious manual labor or back-breaking work - with Stone Forks, you can swiftly and effortlessly clear your land.

We understand that every job is unique and demands specific requirements. That's why we offer a range of sizes to cater to your individual needs. Simply let us know your preferences, and we will tailor a bespoke solution just for you.

Discover the power and efficiency of Stone Forks. Say goodbye to the hassle of manually collecting rocks and embrace a more productive and streamlined workflow. Upgrade your equipment today and witness the transformative difference Stone Forks can make!

The wear of bulldozer track rollers can be attributed to several key factors:

Contact with Track Link : The primary cause of wear on support rollers arises from the contact between the roller body and the track link, particularly due to friction on the track link surface. This wear manifests as a reduction in the diameters of the outer flange, roller surface, inner flanges on both sides, and overall width of the track roller.

Insufficient Lubrication: Inadequate lubrication can result in wear from relative motion between the pin and pin bushing, which subsequently shortens the service life of the bulldozer track roller.

Inadequate Track Tension: Insufficient tension in the track can cause lateral bending of the track links during steering maneuvers. This bending leads to the roller flanges pressing against the upper surface of the track links, resulting in significant wear.

Misalignment of Bulldozer Track Roller Center: If the center of the support roller is misaligned with the center of the track or if the rollers are not aligned in a straight line, this can lead to severe friction on one side of the roller during linear movement, accelerating the wear process.

Material and Manufacturing Quality Issues: The use of substandard materials or materials with inadequate hardness can lead to accelerated wear during operation. Additionally, non-compliance in the dimensions or surface roughness of components such as bushings and axle seats can result in abnormal wear patterns.

Inefficient Oil Sump Design: A poorly designed oil sump, such as one with rounded edges in a long oil sump, can lead to dry friction between the axle and the bushing, causing abnormal wear. Furthermore, ineffective lubrication oil film formation exacerbates the wear issues.

The undercarriage of a bulldozer typically represents an average of 50% of the machine's parts and service costs. Therefore, it is crucial to select the appropriate undercarriage from the outset and to maintain it properly.

To choose the correct undercarriage, several key questions must be considered:

How long will I own this machine?

How many hours per week will I operate this machine?

What are the typical ground and soil conditions in my work area?

What impact conditions will I face?

What attachments will be used on the machine?

What are the typical grades and slopes at my job sites?

Maintenance is the best method to reduce ownership and operating costs, extend the lifespan of the undercarriage, and prevent failures. One of the primary actions to undertake is a daily inspection, checking the majority of components to ensure everything is functioning properly and exhibiting no abnormal wear.

The first items to check are the outer edges of the tracks to ensure that no bolts are missing or loose. Next, inspect the track link assembly and bushings to ensure there are no abnormal scalloping or pits on the bushings, as these may indicate wear from forward or reverse movement, or stepping.

Following this, examine the sprocket segment. Within the sprocket pocket, check for any mushrooming of the iron, which could indicate high-speed forward or reverse movement. Then, inspect the idlers for any ridging or abnormal adjustments, ensuring that everything appears to be in good condition. Afterward, verify that all track rollers are secure and that there are no obstructions preventing their operation.

Lastly, assess the carrier rollers to ensure that debris does not accumulate on top of the undercarriage, which may impede their rotation. If the carrier rollers cannot rotate, the tracks will roll over them, wearing down flat spots on the tops of the rollers, which accelerates wear and reduces the undercarriage's lifespan.

Another critical aspect to pay attention to is track tension. One should aim to observe two dips between the drive sprocket and the idlers. A string can be drawn from the top to the bottom, ensuring that there is about one inch of space between the grouser bar and the string to indicate proper tightening. Additionally, check the chrome plating for maximum stretch; exceeding the maximum stretch will result in wear on all iron components.

For operators, it is essential to avoid operating the machine at high speeds in either forward or reverse. Such practices lead to premature wear on bushings and sprockets. If the tracks are too taut, wear will accelerate. It is critical to maintain a slight amount of slack in the tracks to allow for movement between the iron components, thereby preventing excessive wear.

One of the most important factors in prolonging the lifespan of a bulldozer's undercarriage is maintaining its cleanliness. Removing all debris from within the links and from the frame allows the components to move freely and promotes longer component life.

The specific impacts of carburizing treatment on the performance of bulldozer track chains are reflected in the following aspects:

Improved Hardness and Wear Resistance: Carburizing treatment significantly increases the hardness and wear resistance of the chain by increasing the carbon concentration on the surface. For example, in chains used for slagging machines, the enhanced surface hardness allows them to withstand significant tension and pressure, extending their service life.

Enhanced Fatigue Strength and Crack Resistance: Carburizing treatment forms fine, evenly distributed carbides, avoiding network-like or large clumping of carbides, thus improving fatigue strength and preventing issues such as cracking and flaking. Additionally, rare-earth carburizing processes can create a more gradual gradient in carbon concentration, further enhancing fatigue resistance and wear performance.

Improved Adhesion and Coating Performance: For components like the transmission shafts of bulldozers, using ion plating and magnetron sputtering composite techniques during carburizing treatment allows for the deposition of NbTaZrC gradient coatings, increasing the adhesion between the coating and the substrate, improving wear resistance, and extending service life.

Reduced Wear and Increased Longevity: Although carburizing treatment can significantly enhance the hardness and wear resistance of the chain, regular lubrication and maintenance are still necessary in actual use to reduce wear and friction.

Through the increase in hardness, improvement in fatigue strength, enhancement of adhesion, and reduction of wear, carburizing treatment significantly enhances the overall performance and service life of bulldozer track chains.

Customizing car body parts involves the following steps:

 

Consultation and planning: The initial step involves analyzing the customer's ideas and needs to create a comprehensive work plan .

 

3D data scanning:Our professional engineers scan 3D data according to physical sample or collect data according to 3D step format drawing.

 

Product design: A master model is created based on the design confirmation, which will be used to make molds for carbon fiber parts production .

 

Mental mold making: High-quality molds are made, which can be from materials like dry carbon fiber,wet carbon fiber or fiberglass, ensuring the final product's quality .

 

Manufacturing: Proceed up process step one by one,including high temperature hot pressing,product crinding,production paint to make each finish carbon fiber body part.

 

Quality control,packing and delivery: The final step includes quality control checks,use wooden box to pack and the delivery of the finished custom car body parts 

 

Modified Car Body Parts have advantages of enhanced performance,durability,fuel efficiency,etc.

 

 

 

Welcome to visit Jagrow Performance,we can turn your idea into real product.

 

 

 

The Lixiang L6 is a testament to modern automotive engineering, blending style, performance, and cutting-edge technology. Designed for drivers who demand the best, the L6 promises a driving experience like no other. At our company, we specialize in exporting top-quality vehicles and accessories, backed by over a decade of expertise in international trade. We are proud to bring the Lixiang L6 to discerning buyers worldwide.

---

Unmatched Driving Dynamics

Driving the Lixiang L6 is a revelation. Its hybrid powertrain seamlessly combines electric and combustion technologies to deliver exceptional performance with impressive fuel efficiency. Acceleration is smooth and powerful, making highway merging or overtaking effortless. The refined suspension system absorbs road imperfections, providing a ride that is both comfortable and dynamic.

The L6's advanced all-wheel-drive system ensures stability and control in all driving conditions. Whether navigating city streets, winding mountain roads, or open highways, the Lixiang L6 responds with precision and confidence.

---

Interior Comfort and Smart Technology

Step inside the Lixiang L6, and you’ll be greeted by an environment that defines modern luxury. The cabin features premium materials, ergonomic seating, and a spacious layout, ensuring every passenger travels in comfort.

Technology takes center stage with a high-definition infotainment system that integrates navigation, entertainment, and climate controls. Voice command functionality, wireless smartphone connectivity, and an immersive sound system make every drive enjoyable and convenient. The Lixiang L6 also offers customizable ambient lighting to enhance the mood of any journey.

---

Safety Redefined

Safety is a priority in the Lixiang L6, which features a suite of advanced driver-assistance systems, including adaptive cruise control, automatic emergency braking, and blind-spot monitoring. Its 360-degree camera system simplifies parking and enhances situational awareness, giving you peace of mind in any driving scenario.

---

Why Choose Us?

As a trusted exporter of vehicles and accessories with over ten years of experience, we ensure a smooth buying experience and deliver high-quality products to customers worldwide. Here’s why customers trust us:

• Expertise: A decade of knowledge in international vehicle trade.
• Global Reach: Efficient delivery to buyers across continents.
• Comprehensive Service: From purchase to after-sales support, we’ve got you covered.

When you choose us, you’re not just buying a car—you’re partnering with an industry leader committed to excellence.

---

Experience the Future with the Lixiang L6

The Lixiang L6 is more than a car; it’s a lifestyle upgrade. Combining eco-friendly innovation with luxury and performance, the L6 represents the future of driving.

Contact us today to learn more about the Lixiang L6 and take the first step toward owning this exceptional vehicle. Let’s make your dream car a reality.

The Surge in Electric Van Conversions: Triumphs and Traction

The electric vehicle (EV) revolution has been gaining traction across the automotive spectrum, leading to an increased focus on the electrification of commercial vehicles. In this context, conversion vans—those versatile, customized vans suitable for work, leisure, or luxury travel—are poised to benefit from the innovations of EV technology. This shift presents a compelling convergence between environmental consciousness, utility, and comfort that is reshaping the van industry dynamics.

Xiamen Van Seat: A Partner in Progress

 

Xiamen Van Seat Technology Co., Ltd., a prominent player in the comprehensive automotive technology industry since 2008, has been steering this transformative trajectory. With a robust portfolio in the R&D, manufacturing, and sales spheres, Xiamen Van Seat has carved a niche for itself in delivering tailored seating solutions for a spectrum of vehicle applications.

 

Embracing both the OEM and Aftermarket paradigms, Xiamen Van Seat specializes in crafting purpose-driven seating for an assortment of vehicles.From car seats and bus seats extending to specialized solutions for school bus seats, luxury van seats, and SUV seats, to camper van seats,RV seats and ambulance seating, with a particular focus on the innovative development of conversion van seats that cater specifically to the EV market. Xiamen Van Seat is synonymous with versatility and quality.

 

The Positioning of Large and Medium-Size Vans in the EV Landscape

There is a discernible trend towards the electric transformation of van models, particularly in the realm of large and medium-sized vans, due to several driving factors:

 

1. Economic Viability: With advancements in EV technology, costs have been reduced, making EV vans a financially attractive option for many businesses and individuals.

 

2. Environmental Impact: The electric drive reduces greenhouse gas emissions and contributes to the broader goal of environmental sustainability.

 

3. Consumer Demand: As consumers become more eco-conscious, there is an increasing demand for products that align with sustainable practices.

 

4. Technological Advancements: Improvements in battery range, charging infrastructure, and vehicle capabilities are making EV vans more practical and appealing across varied applications.

 

 

5. Regulatory Support: Incentives and regulations supporting the shift to electric transportation are bolstering the adoption of EV vans.

Xiamen Van Seat's Dedication to the EV Future

 

The electric transition in the van market isn't just a trend; it's a strategic evolution that aligns with global sustainability goals. Xiamen Van Seat, with its focus on specialized seating solutions for electric vans, is a testament to the concerted industry effort towards a cleaner, smarter, and more comfortable future of transportation.

 

 

The path towards electrified commercial transportation might seem novel, but for Xiamen Van Seat, it’s a calculated step in their vision of a sustained and advanced automotive future. As the wheels of progress continue to turn, it’s clear that the electrification of vans is not just a trend—it's an irreversible tide, and Xiamen Van Seat is at the vanguard, guiding the charge towards a smarter, greener horizon.