Xiamen Van Seat, as a leading Chinese manufacturer specializing in RIB beds, we often deal with questions about whether RIB beds are comfortable. We have extensive experience in the research, development and production of ergonomic seating solutions, so in this article, we will introduce you to the characteristics, user feedback and applications of RIB beds.

 

RIB bed user feedback

Users who have purchased RIB beds from Xiamen Van Seat said: The advantage of RIB beds is that they can be seamlessly converted between seats and beds, and the ergonomic design allows the RIB bed to maintain comfort in dual use.

 

Applicable scenarios for RIB beds

1. Campervan and RV conversions

2. Family travel

3. Business and leisure travel

4. Special events and outdoor adventures

 

If you would like to learn more about the RIB Seat Bed, please visit www.luxuryvanseat.com.

RIB bed is a versatile and innovative solution for campers and RVs, perfectly combining the function of a seat during the day with a comfortable bed at night. It can effectively utilize the space in the vehicle, improve the comfort, durability and functionality in the vehicle, and is very important for camper and RV owners, etc. It has a wide range of uses. In this article, Xiamen Van Seat will provide a comprehensive guide on how to use the rib bed effectively to ensure optimal performance and user satisfaction.

 

 

 

1.Installation

Before using the rib bed, it needs to be properly installed in your vehicle.

a. Preparation

Empty any existing seats or items in the installation area in the vehicle and clean the floor thoroughly. Measure the space in the vehicle to ensure the rib bed. Mark the installation area with tape or chalk lines to ensure that the RIB bed to be installed can fit perfectly in the vehicle.

b. Mounting bracket

Attach the mounting bracket to the floor of the vehicle to secure the RIB bed according to the instructions of the RIB bed manufacturer.

c. Assemble the rib bed

Assemble the RIB bed frame according to the design of the RIB bed, and make sure that the seat belts are properly installed and can be worn well.

 

2. Convert to bed

a. Remove the seat belt

Be careful to unfasten the seat belt to avoid any damage

b. Adjust the seat

The RIB bed has different tilt and slide mechanisms, and users can adjust the settings according to their needs to get more space.

c. Convert to bed

Use the RIB bed mechanism to fold up the seat back and flatten it into a bed, making sure the bed is fully extended and stable.

 

3. Safety tips

Before driving the vehicle, you need to confirm that the RIB bed is stable and firm, and has sufficient support and cushioning.

 

4. Maintenance and care

Keep the RIB bed clean regularly to prevent dust accumulation. Check the RIB bed regularly for signs of damage to ensure safe use.

 

The RIB bed provides a practical and comfortable solution for campers and RVs, providing you with a comfortable experience on the road. If you want to learn more about the RIB Seat Bed, please visit www.luxuryvanseat.com.

Rock and roll bed and RIB bed are two of the most popular choices in the field of camper and RV conversion. As the leading rock and roll bed and RIB bed manufacturer in China, Xiamen Van Seat is well aware of the unique features and advantages of these two bed seats. We have accumulated rich experience in designing, producing and applying these two seating solutions. Both rock and roll bed and RIB bed are widely used in multiple industries, but there are significant differences in use and function. Let's take a look at what is the difference between rock and roll bed and RIB bed?

 

 

1. Design 

Rock and roll bed:Rock beds are designed to be pulled forward and you sleep on the same side as you sit.

Rib seat bed:The seat side of the chair is flipped using a lever, and the user sleeps on the underside of the seat.

 

2.Function

Rock and roll bed:It can be quickly converted from a seat to a bed.

Rib seat bed:Provides a completely flat sleeping surface, which is more suitable for sleeping.

 

3. Comfort Sleeping surface

Rock and roll bed:The sleeping surface is interlocking, but not as flat as a rib bed.

Rib Seat Bed:Provides a completely flat sleeping surface for better comfort and support.

 

4. Safety Features

Rock Bed:Not all rock beds are crash tested.

Rib Seat Bed:Fully crash tested and TUV certified.

 

4. Space Utilization

Rock Bed:These beds take up more space when not in use because they are pulled forward for sleeping.

Rib Seat Bed:Rib beds offer more trunk space when not in use because they fold neatly into the seating position.

 

5. Installation 

Rock Bed:Usually easier and quicker to install.

Rib Seat Bed: May require more time and effort due to complex mechanisms.

 

6.Customization

Rock Bed:Available in a variety of colors and materials.

Rib Seat Bed: Can be bolted through the truck bed and offers additional features such as ISOFIX as optional upgrades.

 

7. Cost

Rock Bed:Affordable

Rib Seat Bed:Has advanced design and safety features, more expensive.

 

If you want to know more about RIB Seat Bed and rock and roll bed, please visit www.luxuryvanseat.com.

Crawler undercarriage is used walking component of construction machinery.If they can be used reasonably and operated scientifically,then will extend the working service life effectively.How to extend the life of excavator crawler chassis undercarriage track chain assembly?

 

To avoid the crawler track wear

During normal operations,it is easy to wear the chassis when the operator's operating habits or the impact of the working condition.it is possible to regularly switch the machine position during operations to reduce excessive unilateral wear. When conditions do not permit or the meshing parts of the excavator accessory sprocket and tracks link have developed severe wear, the machine can be stopped to remove the left and right track chain, and the excavator track link chain replacement method can be used to reduce excessive wear of the undercarriage chassis.

 

Reasonable operation to avoid non-standard actions

There are scientific operating specifications for on-site operations that should be observed strictly, especially during prolonged load operations when traveling repeatedly on inclined ground or suddenly turning, which can easily lead to wear due to the contact between the track link assy,sprocket and idler. Timely maintenance should be avoided as much as possible during use.

 

Don’t forget he inspection and maintenance of excavator accessories and crawler undercarriage.

During working, components bolts nuts of track roller,carrier roller,track shoe,track chain link assy ,sprocket, idler become loose due to prolonged operation of the equipment or excessive vibration. The loose bolts can easily cause abnormal clearance between the bolts and the track shoes or cracks in the track shoes after being stressed, leading to a sharp reduction in the service life of the track link chain. Therefore, it is best to regularly inspect the doolincm excavator accessory tracks during use based on the usage status, and reinforce the loose bolts and nuts, which can also effectively enhance the service life of the excavator accessory track chassis.

 

 

1. Don't use detergent indiscriminately

Maintaining wheels is the same as maintaining a car. Many household detergents and dishwashers commonly used on the market are basically too strong for the surface of the wheel hub due to their alkaline or acidic nature, which will cause chemical reactions on the surface of the wheel hub and lose their luster. The relationship is beautiful. Be careful when using. You can choose a little neutral soapy water to rinse.

2. Do not wash the wheels when they are hot

When the hub temperature is high, it should be cleaned after cooling. Do not use cold water to cool down, this will damage the wheel hub, and even cause deformation of the brake disc, affecting the braking effect.

3. Clean the wheels clearly

Well-cleaned wheels should be cleaned with neutral soapy water and wiped with a soft cloth at the same time. After cleaning, the surface of the wheel hub should be coated with corrosion-resistant products to maintain the surface brightness. If the aluminum alloy wheel rim hub is glued with asphalt that is difficult to clean, if it has no effect, you can use a cleaner to remove it with a brush, but be careful to avoid using hard brushes, which can easily damage the surface of the wheel hub.

Copycat car wheels or counterfeit car wheels have caused many tragedies. But if you are buying a large-scale forged car wheel, then don't worry about using it. In fact, in terms of strength, large-made car wheels are stronger than original car wheels, even though they are lighter.

As for the service life, it depends on whether you switch to a low flat ratio tire. If the tire specifications remain the same as the original factory, then just use it with confidence. Remember that the premise is to use genuine forged car wheels. However, if you switch to low-flat-ratio tires, you need to be careful. If the flat-ratio is lower than 40, don't try difficult actions such as high-speed pit punching and speed bumps. Slowing down honestly is good for tires, wheels, shock absorbers, tower tops and even the body. Lightweight automobile wheels are actually an effective means to reduce the quality of non-spring loads. This will make the bounce under the spring more neat. High speed will not be “light”, but will be more stable.The braking distance will theoretically be shortened, but I haven't tested it specifically, and I can't feel it. As for steering, it will definitely help, but it is also difficult to quantify.What is energized and can be felt is the acceleration of performance improvement.

The selection of wheels, how to choose the best one?Many people will transform the car at will in order to change the performance of the car, and the transformation of the car requires professional knowledge.

Don't blindly increase the wheels.Some people increase the wheels to improve the performance of the car. When the outer diameter of the tires remains the same, the large wheels are bound to match the wide and flat tires. The lateral swing of the car is reduced, and the stability is improved. When cornering, it is like a dragonfly, passing lightly.However, the flatter the tire, the thinner its thickness, the worse the shock absorption performance, and greater sacrifices must be made in terms of comfort.In addition, if there are a few roadblocks such as stones, the tires can easily be damaged.Therefore, the cost of blindly increasing the wheelhub rim cannot be ignored. Generally speaking, it is most appropriate to increase the size of the original wheelhub rim by one or two inches.

This means that when choosing, you can't choose your favorite shape as you want, and you have to follow the advice of the technician to consider whether these three distances are appropriate.

The complex and dense wheels are indeed very beautiful and appear to be of high grade, but it is easy to be refused to wash or overcharged when washing the car because it is too troublesome to wash.The simple wheels are full of movement and clean.Of course, if you are not afraid of trouble, it's okay. Nowadays, the aluminum alloy wheels that are deeply popular with the people, compared with the iron-cast wheels in the past, the degree of deformation resistance has been greatly improved, the weight has been greatly reduced, the power loss of the car is small, it runs fast, saves fuel and has good heat dissipation. It is loved by the majority of car owners.

The following factors need to be considered when choosing a car wheel：

Tire size and type: The size and type of tires of different models are different. The wheel hub size should be selected according to the actual size and type of the vehicle.

Vehicle performance requirements: Different wheel sizes will affect the performance of the vehicle, such as acceleration, braking and handling.Choose the appropriate wheel size according to your own needs.

Driving conditions and driving habits: Different driving conditions and driving habits have an impact on the wear and service life of the wheel hub. The size of the wheel hub should be selected according to the actual situation.

Wheel material and manufacturing process: Different wheel material and manufacturing process will affect the quality and price of the wheel, and the appropriate wheel should be selected according to the actual situation.

In short, choosing the size of an automobile wheel hub requires comprehensive consideration of multiple factors, and trade-off and selection according to the actual situation.It is recommended to choose a regular manufacturer and brand when choosing wheels, and consult a professional auto repair master or salesperson.

1.Driving comfort has been improved.

Because aluminum alloy wheels have the metal characteristics of absorbing vibration and rebound, they have high dimensional accuracy after being processed by CNC machine tools.It's really round.Partial swing and small beating.The balance is very good, which can make the car very smooth and comfortable.

2.Fuel-saving and normal driving.

Due to the light weight of the aluminum wheels, the rotational inertia of the four wheels is reduced after replacement, the acceleration of the car is increased, the braking energy demand is reduced, and the fuel consumption is reduced.

3. Improve driving safety.

The heat dissipation coefficient of aluminum alloy wheels is three times that of ordinary steel wheels.At the same time, combined with the structural characteristics of aluminum alloy wheels, when driving for a long time, the heat generated by the tires and braking system is discharged into the air to maintain the appropriate temperature.

4.The beauty of the whole vehicle is improved.

The exterior design of the aluminum wheels is very exquisite.The shapes are diverse, and the integration of the wheels can also be realized to show its beauty and enhance the beauty of the vehicle.

The classification of automobile wheels can be divided according to material, structure, use, etc.

According to different materials, wheel rims can be divided into aluminum alloy wheels, steel wheels and carbon fiber wheels; according to different structural forms, wheel rims can be divided into monoblock wheels, multiple-piece wheels and tire-studded wheels; according to different uses, wheel hubs can be divided into ordinary wheels, sports wheels and racing wheels.

Aluminum alloy wheels are widely used in modern automobiles. They have the advantages of light weight, beautiful appearance, high strength, and good heat dissipation. They can improve the power performance and handling performance of automobiles.

However, the price of aluminum alloy wheels is relatively high, and they are easy to break, and they require frequent maintenance and maintenance.

Steel wheels are wheels used in traditional automobiles, which have the advantages of being strong, durable, and more affordable.

However, the weight of the steel wheels is too large to improve the handling sensitivity and acceleration performance of the car.

Carbon fiber wheels are a new type of wheels with a high strength-to-weight ratio, which can significantly improve the handling and power performance of automobiles, and are favored by racing cars and some sports car owners.

However, the production cost of carbon fiber wheels is higher and the price is expensive.

A single-piece wheel hub is a widely used type of wheel hub in automobiles today. It is made of a piece of aluminum alloy or steel material, which is lightweight and beautiful.

However, the production of single-piece wheels is more difficult and the production cost is higher.

The multi-piece rim is composed of two or more small wheel discs, with a detachable structure, which is easier to maintain and replace.

However, the splicing structure of multiple wheels reduces the overall strength, and it is not as beautiful as a single wheel.

Tire-studded wheels have the advantages of high strength, non-slip and air leakage, and are commonly used in heavy-duty vehicles such as trucks.

However, the weight of the tire-studded wheels is large, which will affect the fuel consumption and driving performance of the car.

Taken together, each type of wheel rim has its own unique advantages and disadvantages. Consumers should choose suitable wheels according to their own tastes, models and uses.